Midea MHC60GSS, Инструкция по эксплуатации

Страница: 6 / 12

Hook the hood body



Hook the hood body to the bracket
20
.
Level the hood body itself.
Lock screws (M5*12) on the hood fixing bracket to prevent the hood body from accidently
sliding off . Remove the filter,from the inside of the hood body, fix the screws 10 to
Wall Plugs 11 at the points (3) (solution2) .



Right Wrong
CONNECTIONS
DUCTED VERSION AIR EXHAUST SYSTEM
When installing the ducted version, connect the hood to the chimney
using either a flexible or rigid pipe ɸ 150 or ɸ 120 mm, the choice of
which is left to the installer.
If to install a ɸ 120 mm air exhaust connection, insert the reducer
flange 3 on the hood body outlet.
Fix the pipe 4 in position using sufficient pipe clamps (not supplied).
Remove possible charcoal filters.
2 3 4
5 7 8
9 10 11
6