Midea MFWS712, Руководство пользователя

Страница: 11 / 24

7 & 8 Extra Function Button
Press the Option button to enable the extra function feature.
Press the
˄
&
˅
buttons to choose your desired extra function, its
corresponding display icon will flash when selected. Press the
Option button within 10 seconds to confirm your selection, the
selected function icon will remain lit. Repeat this process to
cancel.
9
Start / Pause Button
Press this button to start the selected wash program. Once a
wash has begun, press this button to pause the program. Press
again to resume.
9
CONTROL FEATURES AND FUNCTIONS
Extra Function table
Prewash
An extra wash cycle will be added before main wash.
(Available on Cotton, Synthetic, Sportswear, Mixed Wash, Baby Care program.)
Extra Rinse
An additional rinse cycle will be added to remove detergent residue.
(Available on all programs except Wool & Spin)
Soak Wash
A longer soak cycle to lift stains. The soak wash will commence when the
target water level is reached.
Note: Soak wash will be before Prewash if Prewash is selected, and the
Prewash indicator light will flash during soak. Main wash indicator light will
flash during soak if Prewash function is not selected.
(Available on Cotton, Synthetic, Sportswear, Mixed Wash, Baby Care program.)
Rinse Hold
No drain & spin after the final rinse cycle. The water will remain in the drum
to prevent the laundry creasing until the washer is ready to unload. Press
the “Start/Pause” button to continue.
Note: The Rinse Hold icon will display for up to 10 hours after of which the
machine will switch off.
(Available on all programs except Eco Wash, Wool & Spin.)
Speed Wash
Wash time will be decreased to speed up the cycle. If the washing time is
less than 20 minutes (after heating), it will wash for 5 minutes, higher wash
times will be reduced to 20 minutes (after heating).
(Available on Cotton, Synthetic, Sportswear, Mixed Wash, Baby Care program.)
Intensive Wash
Additional wash time is added to increase washing effects.
(Available on cotton, synthetic, Sportswear, Mixed Wash, Baby Care Program.)
Foam Detection
Excess soap suds will occur when too much detergent has been added
.
The Foam
Detection function will automatically sense this and increase the rinse to eliminate
excess suds
.
Buzzer Sound
The buzzer sounds once a program has completed
.
To disable the buzzer function
,
power on the washer
,
press the
"
Temp
"
button for 3 seconds
,
you will hear a
beep
,
the buzzer will now be disabled
.
Repeat this process to restore the buzzer
function
.