Installation
This appliance is always supplied with a set of
adjustable feet and, depending on the model, with
a splash guard.
The appliance may also be used without the splash
guard.
Fitting the adjustable feet
Beforehand:
• Remove all parts that are not permanently fixed
.
• Remove the accessories from the oven.
Proceed as follows:
• Tilt the appliance by raising one side slightly from
the floor.
• With the plates in position, screw the adjustable
feet into the mounting holes on the underneath of
the appliance.
• Repeat the process on the other side.
You can make the final adjustments to the feet in
order to level the appliance once the electricity
supply ha
s
been connected.
If it is necessary to pull the appliance, screw the
adjustable feet in fully. Make the final settings only
when the other installation tasks have been
completed.
10