Midea MDRF632FG Series, Руководство пользователя

Страница: 13 / 396

Trouble
shooting
EN-12
Safety
Information
Safety
Information
Proper Use of
Refrigerator
Proper Use of
Refrigerator
Maintenance of
Refrigerator
Maintenance of
Refrigerator
Trouble
Shooting
Appendix
Trouble
Shooting
Appendix
2.2 ENERGY SAVING
TIPS
•
The appliance should be located
in the coolest area of the room,
away from heat producing
appliances or heating ducts, and
out of direct sunlight.
•
Let hot foods cool down to
room temperature before
placing it in the appliance.
Overloading the appliance
forces the compressor to run
longer. Food that freezes too
slowly may lose quality, or spoil.
•
Be sure to wrap food properly,
and wipe containers dry before
placing them in the appliance.
This cuts down on frost build-up
inside the appliance.
•
Appliance storage bins should
not be lined with tin foil, wax
paper, or paper toweling.
Liners interfere with cold
air circulation, making the
appliance less efficient.
•
Organize and label food to
reduce door openings and
extended searches. Remove as
many items as needed at one
time, and close the door as soon
as possible.
2.3 CHANGING THE
LIGHT
•
Any replacement or
maintenance of the LED lamps
is intended to be made by the
manufacturer, its service agent
or similar qualified persons.
The light source in this product is
only to be replaced by qualified
engineers.
1. First remove the plug.
2. Remove the light cover with a
screwdriver.
3. Take down the lamp panel.
4. Remove the connection terminal.
Trouble
shooting
EN-13
Safety
Information
Safety
Information
Proper Use of
Refrigerator
Proper Use of
Refrigerator
Maintenance of
Refrigerator
Maintenance of
Refrigerator
Trouble
Shooting
Appendix
Trouble
Shooting
Appendix
2.4 START TO USE
•
Before initial start, keep the
refrigerator still for two hours
before connecting it to power
supply.
•
Before placing any fresh or
frozen foods, the refrigerator
should have run for 2 - 3 hours,
or for above 4 hours in summer
when the ambient temperature
is high.
NOTE
This product is not recommended for use
with sockets or main switch with A/GFCI
function, otherwise it may cause tripping.
1. It does not pose a safety risk when
tripped.
2. If tripping persists, it is recommended
to replace the socket or main switch
without A/GFCI function.