Midea MDC07, Руководство пользователя

Страница: 17 / 20

16
TROUBLESHOOTING GUIDE
If the clothes dryer does not perform as expected, malfunctions, or an alarm is sounding, please
check the following list of possible solutions.
If a solution cannot be found or the problem persists, please contact Midea service (refer to page 17).
Do not, under any circumstance, dismantle the appliance yourself.
Problem / Error Possible Cause / Solution
Ÿ
Display does not light up
Ÿ
Plug is not firmly in socket or power not turned on.
Ÿ
Fuse may be blown. Check the power point with another
appliance.
Ÿ
Check if a programme has been selected.
Ÿ
" " is flashing
Ÿ
Water container is full, need to be emptied.
Ÿ
Check hose for condensation outlet.
Ÿ
" " is flashing
Ÿ
Clean lint filter.
Ÿ
Clean air cooler.
Ÿ
Dryer does not start
Ÿ
Check if the Start button has been pressed.
Ÿ
The dryer door is not properly pushed in.
Ÿ
Check if a programme has been selected and it is not in
"Pause" mode.
Ÿ
Water is coming out
Ÿ
Align dryer horizontally.
Ÿ
Clean air condenser and door seal.
Ÿ
Dryer is opened by itself
Ÿ
Check if the dryer is overloaded.
Ÿ
Press door until it “clicks” into position.
Ÿ
Humidity in the room is increasing
significantly
Ÿ
Ventilate room adequately.
Ÿ
Clean the cool grille.
Ÿ
Ensure that the air condenser has been inserted.
Ÿ
Degree of dryness is not reached
or drying time is too long
Ÿ
Check if lint filter and air condenser is clean.
Ÿ
Check if water container is full.
Ÿ
Check water outlet.
Ÿ
Dryer installation too restricted.
Ÿ
Clean the moisture sensor.
Ÿ
Use next higher drying programme or use a Timer programme.
Ÿ
“ ” is on
Ÿ
Water tank is full, empty the container.
Ÿ
Water pump failure or water level sensor failure. Call Midea
Customer Care if the problem persists.
Ÿ
"E30"
Ÿ
Heater failure. Call Midea Customer Care if the problem
persists.
Ÿ
“E32”
Ÿ
Humidity sensor failure. Call Midea Customer Care if the
problem persists.
Ÿ
“E33”
Ÿ
Temperature sensor failure. Call Midea Customer Care if the
problem persists.