Midea MDC07, Руководство пользователя

Страница: 15 / 20

14
CLEANING & MAINTENANCE
Ÿ
Always disconnect the clothes dryer from the mains power source before performing any maintenance
or cleaning of the appliance.
Ÿ
For optimal performance, regular maintenance and cleaning is highly recommended.
Ÿ
Regular maintenance will extend the service life of the clothes dryer.
Clean the Lint Filter
Leave the dryer to cool down.
1. Open the machine door.
2. Take out the lint filter, pull upward to take it out.
3. Clean the lint filter: wipe off the scrap threads accumulated
on the lint filter with your hand or rinse with water and dry
thoroughly.
4. Reinstall the lint filter.
NOTE!
1. The lint filter accumulated on the filter will block the air circulation, which will cause the extension of
drying time and consumption; therefore, the scrap thread filter shall be cleaned after each use.
2. Do disconnect the power cord before cleaning!
3. Do not operate the dryer without the lint filter!
4. Clean the lint filter after each use to prevent lint accumulation inside the dryer.
Empty the Water Container
1. Hold and pull out the water container with two hands.
2. Tilt the water container, pour out the condensed water and put the tank back
to its place.
WARNING:
Ÿ
Empty the water container after each use. The programme will be paused and the “ ” icon will flash
if the water container is full during the drying process. After the container is emptied, the dryer can be
restarted by pressing
【
Start/Pause
】
button.
Ÿ
Do not drink the condensed water.
Ÿ
Do not use the dryer without the water container.