12
11
Notice
Buzzer of vibration: Due to heavy wet clothes' turning and bumping,
and this will cause noise accordingly.
Air bumping: When drying, machine will generate steam which will
come out from pipe and this will cost bumping with the bottom of
inner tub.
Timer noise when working.
Trouble Cause Solution
The sound of dryer when runs can cause
Will not start
External hot or
can smell hot
Clothes too dry
Clothes shrink
Hairball on
clothes
Power cut.
The power plug is not plugged tight.
Dry clothes exceed.
The temperature fuse is cut.
Wait for switching on electricity.
Check the power socket, make sure plug
tight.
The clothes in drier must be after spinning,
and drying clothes can not exceed 7kg.
Please career man restore the temperature
fuse.
The lint filter is dirty.
The clothes in machine are too full.
Not to take out the clothes in time
when finish.
The clothes don’t assort properly.
The temperature is enacted too high.
Make sure clean the lint filter in time.
Clean out the stem.
Make sure the clothes are not too full.
Take out the clothes immediately when
finish.
See page 7.
Observe the maintenance label on clothes.
Too dry.
Observe the maintenance label on clothes,
if easy to shrink, should examine the
clothes when dry. Take out the clothes
when tiny damp for too dry. Then hang the
clothes until full dry.
It is right for synthetic fibre and
permanent press fibre causing
hairballs. This is because the ri
-ght rub causing.
Use fabric softener lubricate fibre,
please spray settled gule on cuff
and neckline when iron clothes.
Turn the sarcenet out for reducing
rub.
The uptake or exhaust duct is
dirty.
Other functions description
Other functions description
Step 1: Warning function
Step 2:Auto power-off function
1.This machine will auto power-off after 10 minutes when you do not
start any program.
2.This machine will auto power-off after 6 time's buzzer on drying.
Indication of fault
Cause of fault
Phenomenon
of fault
Alarm of the
buzzing sound
Solution of alarm
Alarm for
temperature
exceed
If the check
temperature
exceed 63 in any
program,alarm.
"Middle dry"
"strong dry"
indicator flash
The buzzer goes
on buzzing sound
for 10 seconds.
If the alarm does
not be solved ,
every 16 minutes
re-buzzs for
10 seconds.
Power off wait the
heating tempera-
ture fall then start
Alarm for
the door open
Open the door
after
program
start
"little dry" "middle
dry"indication
flash
Close the door
solve alarm,reat-
art the program.
Alarm for
malfunction
of
temperature
sensor
"An hour dry"
“light dry"
indication flash
Program start
sensor open
Power off check
themachine start
it when in normal
Program start
sensor short
"An hour dry"
“middle dry"
indication flash
