Midea MD-7388 Скачать руководство пользователя страница 4

       

Power supply and grounding

   

 
  

•  

Grounding

The dryer employs alternative current with the rated voltage and frequency. When the 
voltage fluctuates between 6% of rated voltage, the dryer can work normally. 
 A special power socket with a capacity   10A  for the dryer had better be set beside the 
dryer for convenience and safety. The method of connection of the 
socket is as the figure below.
To be safe, please make improvements as soon as possible
according to the rules and suggestions mentioned above.

      The socket and the grounding wire must be installed by an electrician to prevent 
      incorrect installation or use of the socket and to guarantee the safety of use of 
      electricity. No connection of the grounding wire and the neutral wire, otherwise the 
      cabinet will be charged, which is likely to cause the danger of electric shock.

•  Precautions 

Install or store where it will not be exposed 
to temperatures below freezing or exposed 
to water or weather, which could cause 
permanent damage and invalidate the 
warranty. 

Keep area around the exhaust opening and 
adjacent surrounding areas free from the
accumulation of lint, dust and dirt. An 
obstructed port might reduce the airflow. 

Thoroughly spin the laundry in washing 
machine. High spin speed can reduce the 
drying time and save energy consumption.

Make sure combustible sprayer will not be
close to dryer when it is working, and once
the gas leaks, do not touch plug or 
start/pause on it.

Do not wash or dry articles that have been 
cleaned in, washed in, soaked in or spotted 
with combustible or explosive substances 
( such as wax, oil, paint, gasoline, degreasers, 
dry-cleaning solvents, kerosene, etc.). 

Never attempt to operate this appliance if it 
is damaged, malfunctioning, partially 
disassembled,or has missing or broken parts, 
including a damaged cord or plug.

Do not allow children on or in the appliance. 
Close supervision of children is necessary 
when the appliance is used near children. 

Please do not use the machine when your 
foot or hand with water.

Do not store plastic, paper or clothing that 
may burn or melt on top of the dryer during 
operation.

The exhaust air must not be discharged into
a flue which is used for exhausting fumes
from appliance burning gas or other fuels.

Do not dry articles containing rubber, plastic 
or similar materials such as padded bras, 
tennis shoes, galoshes, bath mats, rugs, bibs, 
baby pants, raincoat plastic bags or pillows 
that may melt or burn. Some rubber 
materials, when heated, can under certain 
circumstances produce fire by spontaneous 
combustion.  

The door can be opened only after the 
programme of the drying machine is 
completed.Do not open the door before the 
programme finished to avoid the human 
skin from being scalded by hot steam or over 
heated drying machine. 

5

6

SAFETY INSTRUCTIONS

SAFETY INSTRUCTIONS

Warning!

Содержание MD-7388










Отзывы: