background image

1

2

•  The appliance is not intended for use by persons (including 
    children) with reduced physical, sensory or mental capabilities, 
    or lack of experience and knowledge, unless they have been 
    given supervision or instruction concerning use of the 
    appliance by a person responsible for their safety.
•  Children should be supervised to ensure that they do not play 
    with the appliance. In EN standard countries, this appliance 
    can be used by children from 8 years and above and persons 
    with reduced physical, sensory or mental capabilities or lack of 
    experience and knowledge if they have been given supervision 
    or instruction concerning use of the appliance in a safe way 
    and understand the hazards involved. Children shall not play 
    with the appliance, leaning and user maintenance shall not be 
    made by children without supervision.
•  The tumble dryer is not to be used if industrial chemicals have 
    been used for cleaning.
•  The lint trap has to be cleaned frequently.
•  Lint must not to be allowed to accumulate around the tumble 
    dryer.
•  Do not dry unwashed items in the tumble dryer.
•  Items that have been soiled with substance such as 
    cooking oil,acetone, alcohol, petrol, kerosene, spot 
    removers, turpentine, waxes and wax removers should be 
    washed in hot water with a extra amount of detergent 
    before being dried in the tumble dryer.
•  Items such as foam rubber (latex form), shower caps, 
    waterproof textiles, rubber backed articles and clothes or 
    pillows fitted with foam rubber pads should not be dried 
    in the tumble dryer.

SAFETY INSTRUCTIONS
             

Safety Instructions ..................................................

INSTALLATION
             

Product Description ................................................

                    Installation  ...........................................................

OPERATIONS
             

Quick Start .............................................................

                    Before Each Drying ..................................................

                    Control Panel .........................................................

                

Drying Programmes Table .....................................

MAINTENANCE
             

Cleaning And Care

 .................................................

                

Trouble Shooting ....................................................

                    Technical

 

Specifications .........................................

                

2

7

7

9

10

11

12

13

14

15

CONTENTS

SAFETY INSTRUCTIONS

Safety Instructions

Содержание MD-7388










Отзывы: