Page 11
How to Use
Basic
Functions
SETTING TEMPERATURE
SETTING FAN SPEED
Press or button to
set the temperature.
The operating temperature range for units
o
is 17-30 C. You can increase or decrease
o
the set temperatue in 0.5 C.
Hold down SWING button for
one second to start fan speed
setting mode.
Press or button to
select the fan speed: Au, 20,
40,60,80 or F.
NOTE:
FAN SPEED can t be set in AUTO mode.
,
Setting Angle of Air Flow
Setting vertical angle of air flow
While the unit is on, use the
SWING
button
to set the direction (vertical angle) of airflow.
Press the
SWING
button to make the
louver swing up and down continuously.
Press the button until the direction you
prefer is reached.
Setting horizontal angle of air flow
The horizontal angle of the airflow must be set
manually. Grip the deflector rod (See
Fig. 7
)
and manually adjust it to your preferred direction.
Fig. 6
SWING
SWING
SWING
Page 10
The following are instructions for using your air
Conditioner s basic functions. Refer to
How to
Use Advanced Functions
section for those not
covered here.
How to Use Basic Functions
3
AUTO Function
COOL Function
HEAT Function
,
Within a range of 8m
Press this button
to turn on the unit
and enter AUTO mode
Press this button again to
turn off the unit.
Press this button
to turn off the unit.
Press this button
to turn off the unit.
When the unit is off, or not under cool mode,
press button and EYE simultaneously
for one second will start cool operation.
When the unit is off, or not under heat mode,
press button and SWING simultaneously
for one second will start heat operation.
NOTE:
In AUTO mode, the unit will automatically select the
COOL or HEAT function based on the set temperature.
How to Use
Basic
Functions
ON/OFF
ON/OFF
ON/OFF
ON/OFF
SWING
EYE
