Midea JL1645T-Z, Инструкция по эксплуатации

Страница: 8 / 12

7
3-2 Using The Product
Start up
1. Power on, start to use the product.
2. When using it for the first time, press the cold water output and hot water output buttons till
discharging cold water and hot water from the faucet, ensure to remove the air from the hot
tank and cold tank, ensure the dry burning indicator of the product is under normal state.
3. After step 2, then turn on the heating and cooling switches on the rear side according to the
actual requirement, start the heating and cooling functions, the green one is the cooling switch
and the red one is the heating switch.
Control Panel
Heating
Cooling
UV
Filter
Icon
Icon
Decription Decription
Hot Water Button.
Touch the Hot Water Button, this icon lights
up, It means you Select the hot water.
Ambient Water Button.
Touch the Ambient Water Button, this icon
lights up, It means you Select the ambient water.
Cold Water Button.
Touch the Cold Water Button.,this icon lights up,
It means you Select the cold water.
Quantitative Water Output Button.
Touch the Quantitative Water Output Button,
this icon lights up, It means you Select the the
quantitative water output function.
Taking Water Button
Press this button to get water.
ECO Button.
Touch to turn on / off Eco Mode in which the
heating and cooling function is disabled and
energy is being saved.
Heating Indicator
When heating, the heating icon is on, after heating
or when the product is not heating, it is off.
Cooling Indicator
When cooling, the cooling icon is on, after cooling
or when the product is not cooling, it is off.
UV Working Indicator
When the UV sterilizing is enabled, UV icon turns
on.
Filter Life Indicator
When the filter life is not expired, the indicator is
on; after the filter life expires, the indicator flashes.
After power on, the Cup icon keeps on.
After power on, the Cup icon keeps on Operation Requirements Instructions
1 taking water function
1.1 Water output after selecting water temperature
Press the water temperature button, corresponding indicator turns on, within 5s, press the“Taking
Water button” to output water (5s later, the water temperature selection will automatically switch to
ambient water), during the water output process, press the “Taking Water” button again, the