4
INSTALLATION METHOD
2. Mounting the casters
Take out the base and casters from the
package, as is shown in Figure 2, and press the
casters into the base mounting hole.
3. Mounting the base in the host
As is shown in Figure 3, put 3 screws (M5 * 20)
through the base, and fix the base host in the
nuts embedded in the host bottom.
4. Mounting the rear guard and blade
As is shown in Figure 4, in sequence, mount the
rear guard, guard nut, blade, blade nut and net
clamp.
5. Assembling the chassis
As is shown in Figure 5, press the spray cap into a
corrugated hose, during assembly, perform
pressing while rotating, and then with screws, fix
the spray cap on the front guard.
Fig.2
Fig.3
Fig.4
Fig.5
6. Mount the components of front guard into
the net clamp
As is shown in Figure 6, mount the front guard into
the net clamp, screw in the net clamp and then
tighten the screws; then mount the corrugated
hose on the top of host.
Fig.6