background image

 
 

                                                                    Service Manual_2020-V1.0

 

65

 

Select “CUBED”, “WATER” or “CRUSHED” on the variable temperature display control panel, light the 

corresponding backlight, and then press cubed and water switch, to achieve the corresponding function of 
cubed, water or crushed. 

 

9.3.5 Turn off the heater strip 

By pressing the key of “ENERGY SAVING” and “FREEZER TEMP” for 3s, the Fahrenheit symbol “°F” 

will blink, and it will take effect by pressing the lock key;   

Under this mode, turn off the heater strip for the rollover beam, distributor, thermal insulating door and 

mouth frame;   

By pressing the key of “ENERGY SAVING” and “FREEZER TEMP” again for 3s, the Fahrenheit symbol 

“°F” will stop blinking, you can quit this mode. It will take effect upon locking;   

9.3.6 WIFI distribution network 

Option

 

By pressing WIFI key for 4s, you can enter distribution network mode, after the distribution network is 

successfully connected, WIFI indication light will keep on; 

9.3.7 Filter change prompt   

If  the  filter  is  used  for  over  150  days,  “WATER  FILTER”  backlight  will  keep  on,  furthermore,  if  over 

180days, “WATER FILTER” backlight will blink. By pressing the “WATER FILTER” key for 3s, you can 
eliminate the alarm and reclock, and the buzzer will ring 3 times.   

9.3.8 Ice maker on / off 

By  pressing  refrigeration  ice  ma

ker key “REF ICE”, refrigeration ice maker will start, and “REF ICE” 

backlight will be lighten; by pressing refrigeration ice maker key “REF ICE” again, refrigeration ice maker 
will be off, “REF ICE” backlight will be extinguished, and it will take effect after locking;   

9.3.9 Lock and Unlock   

Under unlock state, by continuously pressing lock key “WAKE UP” for 2s, it will enter lock state, and the 

lock buzzing sound will ring;   

Under lock state, by continuously pressing lock key “WAKE UP” for 2s, it will enter unlock state, and the 

unlock buzzing sound will ring. 

9.3.10 Conversion betwee

Fahrenheit

 and Celsius 

By pressing “+” and “-” for 3s, 

Fahrenheit and Celsius conversion can be achieved, and the 

corresponding icon 

” and “

” will be on, and it will take effect after locking. 

 

9.3.11 Refrigeration ice maker intake time setting   

By pressing the key of “REF ICE” and “FRIDGE TEMP” for 3s, it will enter the intake time setting for 

refrigeration ice maker, meanwhile, the backlight of “REF ICE” and “FRIDGE TEMP” will blink, and the 
numerical value will display the current setting time; 

press “+”    “-” key to increase or reduce intake time, 

the adjusting step length is 5 (0.5s), the adjusting range is from 50 to 95, corresponding to 5s to 9.5s, the 
initial electrifying is 5.5s by default. It will take effect after locking, and automatic memory will be activated 
upon power failure. 

9.4 Defrosting function 

Principles of refrigerating natural defrosting:   

The evaporator natural defrosting is under the situaton when the refrigeration ends and the pipelines of 

magnetic valve to refrigeration is closed. Blow the remaining refrigerating capacity of the evaporator to the 

refrigerating compartment via fan, with the increase in temperature, the ice and frost on the evaporator 

melt into water, and they are discharged in the water pan of the press bin for evaporation.   

Once one of the following conditions is met, it is allowed to quit refrigeration natural defrosting:   

Содержание French-Door Series






















































































Отзывы: