13
14
Big drawer
The big drawer has a maximum load
of 10kg.
Pull out and install the big drawer
1. Pull out the big drawer;
2. Find the hook at the left and right
sides at the drawer bottom (shown
in the figure).
3. Hold the hook at two sides with a
nose pliers or tweezers and push it
up and out of the groove of sliding
rail, and take out the hook at the
other side with the same method.
4. Take out the drawer.
5. Install the drawer by putting the
hook into the right place.
Hook
Sliding rail
Big drawer
14
Assembly instructions of cold
storage door handle:
1. Firstly, take the handle set bolts out
from the refrigerator, use cross
recessed screwdriver to set the bolt
on the door. Fix it tight with all the
screw thread twisted through the
hole, as shown in the figure;
2. After the first step is completed,
take the Cold storage door handle
out from the box, place it as per the
direction shown in the figure (Note:
i.e. the direction which both screw
holes on the handle are close to the
edge), and hang the handle above
the set bolt;
3. Use the small hexagon spanner
supplied in the box to set the
handle fixing socket head cap
screws into both the small screwed
holes on the handle. After they are
screwed down, gently shake the
handle, so as to confirm that the
handle is well erected.
Assembly instructions of the
refrigeration door handle:
The assembly steps of the
refrigeration door handle is same with
that of the cold storage door handle.
Please note that: during the assembly
of the handle, the direction of tapping
hole is downward (to the ground).
Door handles
Scheme of installation of
cold storage door handle
Difference between the chilling and refrigeration
handle: lie them flat, the one with higher chordal
height is the refrigeration handle
Cold storage door handle
Refrigeration door handle
80
61
Inner socket head cap
screw for handle fixing
Chilling chamber
door handle
Inner socket head cap
screw for handle fixing
Bolt
Bolt
