Midea FF.567L.SB.ICE, Инструкция по эксплуатации

Страница: 13 / 18

See the following figure for keys and display configuration of man-machine interface (Operation interface is
subject to material object)
Display Control
Power on the display panel to reach full display after 3s, the start-up tone rings and the panel displays the
systemic memory mode and temperature settings. This is a lock mode. The factory default memory status
of main control board: temperature of refrigerating chamber and freezing chamber is set to 5
℃
and -18
℃
respectively; there is no setting for special mode; the ice-maker is off by default. After the operation of
display panel, the status is changed and memorized to main control board.
In normal cases, display screen enters standby state and then dies out after display board is locked without
operation of door opening and key operations for 30s.
Where there are key operation, communication failure, sensor failure and ice-making malfunction when the
door is opened, the display screen will light up and prompt relative information. Numeric area displays the
temperature settings of all chambers; when a communication failure occurs, the area of freezing
temperature gives a prompt of communication failure; when a sensor failure occurs, the area of freezing
temperature give a prompt of all fault codes in turns under the lock state; in unlock state, the unlock pattern
lights up; in lock state, the lock pattern lights up. To operate the unlocked keys under the lock state (except
option key of ice water and filter reset), the lock pattern will flash lights.
Key Operation
FRZ.TEMP.:Freezing temperature key
REF.TEMP.:Refrigerating temperature key
MODE.SEL:Option Key of Function
LOCK/UNLOCK:Lock/Unlock Key
ICE OFF:Ice-maker On/Off Key
DISPENSER:Option Key of Ice Water
1.LOCK/UNLOCK
Hold "LOCK/UNLOCK" key for 2s under the unlock state, the system enters the lock state; hold "LOCK/
UNLOCK" key for 2s under the lock state, the system enters the unlock state.
In unlocking, the unlock pattern lights up; in locking, the lock pattern lights up.
To operate the unlocked keys under the lock state (except option key of ice water and filter reset), the lock
pattern will flash lights.
Without any key operation for 30s under the unlock state, the system enters the lock state automatically.
Except the key "DISPENSER" and operation of filter rest, the operations of following keys must be
conducted under unlock state. For any operation under the lock state, the lock icon will flash and prompt
a buzzing sound for fault operation.
The following settings must be valid upon locking.
2.MODE.SEL
Press "MODE.SEL" for cycle setting of the mode "Holiday"
→
"Super Freezing"
→
"Super C
Super Freezing"
→
"Super Freezing"
→
"None"
→
"Holiday"... Display panel and relative setting icon will
display/die out synchronously.
Holiday mode: Freezing chamber is operating upon the temperature setting of
℃
and refrigerating chamber
is off (not freezing). (Closedown of refrigerating chamber has no effect on its lamp control)
Super Freezing mode: Freezing chamber is operating upon the temperature setting of -24
℃
; the Super
Freezing mode will exit automatically after operation for h. Then, freezing chamber restores to the valid 26
temperature setting before Super Freezing mode.
℃
-18
(Power off and then on, the Super Freezing mode exits. After
that, the set temperature of freezing chamber is restored to -18 )
12