Midea BREEZELESS+ Series, Руководство пользователя

Страница: 62 / 68

6 2
.
The FOLLOW ME function enables the
remote control to measure the temperature
at its current location and send this signal
to the air conditioner every 3 minutes interval
When using AUTO, COOL, or HEAT modes,
measuring ambient temperature from the
remote control (instead of from the indoor
unit itself) will enable the air conditioner to
optimize the temperature around
you and ensure maximum comfort.
FOLLOW ME function( )
(optional)
SLEEP Function( )
Active Clean Function( )
The SLEEP function is used to decrease
energy use while you sleep (and don ,t need
the same temperature settings to stay
comfortable). This function can only be
activated via remote control.
This function is used to clean the air
conditioner evaporator to prevent frosting.
When this function is turned on, the indoor
, , ,,
unit display window appears CL , after 20
to 45 minutes, the unit will turn off automatically
and cancel Active Clean function.
Note: The SLEEP function is not available
in FAN or DRY mode.
Press the SET button to enter the function
setting, then press SET button or
Temp or
Temp button to select the desired function.
The selected symbol will flash on the display area,
press the OK button to confirm.
To cancel the selected function, just perform
the same procedures as above.
For the detail, see sleep operation in
USER S MANUAL.
,
,,
,,
,,
,,
SET
Press the SET button to scroll through
operation functions as follows:
Active clean ( ) Sleep( ) Follow Me( )
gg
How To Use The Advanced Functions