Midea 938877, Руководство пользователя

Страница: 17 / 60


Page 15

Operation Instructions
Operating
Instructions
COOL operation
· Press the "MODE" button until the "COOL" indicator
light comes on.
· Press the ADJUST buttons "+" or "-" to select your
desired room temperature. The temperature can be
set within a range of 16°C/60°F to 30°C/86°F
.
· Press the "FAN SPEED" button to choose the fan
speed.
DRY operation
· Press the "MODE" button until the "DRY" indicator
light comes on.
· Under this mode, you cannot select a fan speed.
The fan motor operates at AUTO speed.
· Keep windows and doors closed for the best
dehumidifying effect.
· Do not put the duct to window.
Shows Error codes and protection code:
The unit may stop operation or continue to
run safely. If the error codes appear, wait for
about 10 minutes. The problem may resolve
itself. If not, disconnect the power, then
connect it again. Turn the unit on. If the
problem persists, disconnect the power and
contact your nearest customer service
center. Error code appears and
begins with
the letters as the following in the window
display of indoor unit: EH(xx), EL(xx),
EC(xx), PH(xx), PL(xx), PC(xx)
P1-Bottom tray is full--Connect the drain hose
and drain the collected water away.If protection
repeats,call for service.
Note: When one of the above malfunctions
occurs, turn off the unit, and check for any
obstructions. Restart the unit, if the malfunction
is still present, turn off the unit and unplug the
power cord. Contact the manufacturer or its
service agents or a similar qualified person for
service.
AUTO operation
· When you set the air conditioner in AUTO mode, it
will automatically select cooling, or fan only operation
depending on what temperature you have selected
and the room temperature.
· The air conditioner will control room temperature
automatically round the temperature point set by you.
· Under AUTO mode, you can not select the fan speed.
Power button
Power switch on/off.
LED display
Shows the set temperature in °C or °F("°F" no
display for some models) and the Auto-timer
settings. While on FAN modes, it shows the
room temperature.
Sleep button
Press SLEEP button to initiate the SLEEP operation
and the sleep light illumiantes.Press SLEEP button again
to stop the SLEEP operation and the sleep light turns dark.
Press SLEEP button for 3 s econds to initiate the
filter feature.This feature is a reminder to clean
the Air Filter for more efficient operation. The
LED(the light above the button) will illuminate
after 250 hours of operation.