background image

 
 
 

                                                                                                    Service Manual_2018-V2.0

 

8

 

13) 

Do not store or use gasoline or any flammable liquids inside or in the vicinity of this 

freezer. 

14) 

Do not use extension cords or ungrounded (two-prong) adapters with this freezer. If 

the power cord is too short, have a qualified electrician install an outlet near the freezer. Use 
of an extension cord can negatively affect the freezer’s performance. 

Grounding requirement 

This freezer must be grounded. This freezer is equipped with a cord having a grounding 

wire with a grounding plug. The plug must be inserted into an outlet that is properly installed 
and grounded. 

Improper use of the grounding plug can result in a risk of electric shock. Consult a 

qualified electrician or service person if the grounding instructions are not completely 
understood, or if doubt exists as to whether the freezer is properly grounded. 

2.2 Safety instruction for refrigerant

 

Explosion Hazard.

 

Keep flammable materials and vapors, such as gasoline, away from freezer. Failure to do so 
can result in fire, explosion, or death.

 

Safety instruction for refrigerant

 

DANGER

–Risk of Fire or Explosion. Flammable Refrigerant Used. To Be Repaired Only By 

Trained Service Personnel. Do Not Use Mechanical Devices. Do Not Puncture Refrigerant 
Tubing. CAUTION

–Risk of Fire or Explosion. Flammable Refrigerant Used. Consult Repair 

Manual/Owner’s Guide Before Attempting To Service This Product. All Safety Precautions 
Must be Followed. CAUTION

–Risk of Fire or Explosion. Dispose of Properly In Accordance 

With Federal Or Local Regulations. Flammable Refrigerant Used. CAUTION

–Risk of Fire or 

Explosion Due To Puncture Of Refrigerant Tubing; Follow Handling Instructions Carefully. 
Flammable Refrigerant Used.

 

 

 

 

Содержание 22031020005681






































Отзывы: