Midea 22031020005681, Руководство по обслуживанию

Страница: 23 / 37

Service Manual_2018-V2.0
23
Defrost heater
The defrost heater is located at bottom of the evaporator.
Disconnect the connector of defrost heater.
Cut off the band which fixes the defrost heater.
Take off the defrost heater from the evaporator.
Don’t break the welding of the evaporator in case that
only the defrost heater needs to be replaced.
Evaporator in
refrigerating
chamber
Evaporator in
refrigerating
chamber None
Components on the evaporator None
Temperature Controller None
8.6 Compressor case
Rear cover
(None)
Compressor and the cooling system pipe
1
）
Cut off the power, remove the goods in the refrigerator,
with the tape to make the door fixed firmly and prevent
the door dropping when the refrigerator dumping.
2
）
Slowly tilt the refrigerator forward, relying on the wall or
a solid enough object, leaving space to facilitate the
operation. For safety, it should be carried by someone to
prevent its falling.
3
）
Cut off the compressor pipeline.-
❶
Cut off the process
pipeline.-
❷
Cut off the low-pressure muffler.-
❸
Cut off
the high-pressure exhaust pipe.