Midea 22031020000113, Руководство по обслуживанию

Страница: 31 / 45

Service Manual , 2016-12
31 / 45
6) Secure the water inlet tube to the back of the
refrigerator with two self-drilling screws
(provided).
7) Squeeze together and slide the tube clamp over
the fill tube. While still squeezing the clamp,
insert one end of the plastic tube into the fill tube
as far as it will go, then slide the clamp downward
to capture the fill tube in place.
8) Insert the two ice maker mounting screws into the
holes in the freezer wall. Turn each screw
clockwise five times.
9) Use needle nose pliers to remove the terminal
cover located at the top of the freezer by first
pulling down one side of the cover, then pulling
down the other side. Save the terminal cover for
future use in case the ice maker is removed.
10) With the ice maker in one hand, plug the wiring
harness connector into the terminal located at the
top of the freezer panel. Make sure that the
connection is tight. Make sure the wiring harness
is still in the hook on the back of ice maker.