Middleby Hinds-Bock SP-64B, Инструкция по эксплуатации

Страница: 15 / 15

Hinds-Bock Depositing System: Recommended Preventative Maintenance
(where applicable)
Item Part Action Frequency (weeks) Notes
1 O-rings (moving parts) Clean, inspect, lubricate daily Product pistons, valves, spouts; lubricate with
Petrol-Gel before each use.
2 O-rings (moving parts) Replace 3 Always replace when worn flat or damaged
3 O-rings (stationary seals) Inspect for wear 1 Improper seating is the most likely cause of
damage
4 O-rings (stationary seals) Replace 8
5 Lip Seals Clean, inspect, lubricate daily
6 Lip Seals Replace 8
7 Bushings Inspect for wear 1 Replace if there is slop
8 Bushings Replace 16
9 Quick Pins Inspect for wear 1 Replace if there is slop
10 Quick Pins Replace 8 Damage can occur if excessively worn
11 Spout air cylinders Check for air leaks and abnormal
movement 4 Sluggish movement is an indication of
compromised performance
12 Spout air cylinders Replace 12 May vary with cycle rate & run time
13 Product valve air cylinders Check for air leaks and abnormal
movement 4 Sticking and air leaks are most common.
Misalignment can also shorten life of air
cylinder
14 Product valve air cylinders Replace 16 May vary with cycle rate & run time
15 Main air cylinders Check for air leaks and abnormal
movement 4
Ratcheting of strong-back is an indicat
i
on
that one air cylinder is worn before the other.
16 Main air cylinders Replace 16 Best to replace in pairs, to prevent ratcheting
17 Pneumatic valves Replace 52 Modules may be replaced individually
18 Pneumatic quick disconnects Check fit and inspect for leaks and
wear 4
19 Pneumatic quick disconnects Replace 26
20 Jam nuts Check tightness daily
21 Other threaded fasteners Check tightness 2
Pg. 13