background image

III

P/N 60250  September 28, 2012

MIDDLEBY MARSHALL INC.

OVEN LIMITED WARRANTY

(Non U.S.A.)

The Seller warrants equipment manufactured by it to be free from 

defects in material and workmanship for which it is responsible. The 

Seller’s obligation under this warranty shall be limited to replacing or 

repairing, at Seller’s option, without charge, F.O.B. Seller’s factory, 

any part found to be defective and any labor and material expense 

incurred by Seller in repairing or replacing such part. Such warranty 

is limited to a period of one year  from date of original installation or 

15 months from date of shipment from Seller’s factory, whichever 

is earlier, provided that terms of payment have been fully met. All 

labor shall be performed during regular working hours. Overtime 

premium will be charged to the Buyer.

This warranty is not valid unless equipment is installed, 

started, and demonstrated under the supervision of a factory-

authorized installer.

Normal maintenance functions, including lubrication, adjustment of 

airflow, thermostats, door mechanisms, microswitches, burners and 

pilot burners, and replacement of light bulbs, fuses and indicating 

lights, are not covered by warranty.

Any repairs or replacements of defective parts shall be performed by 

Seller’s authorized service personnel. Seller shall not be responsible 

for any costs incurred if the work is performed by other than Seller’s 

authorized service personnel.

When returning any part under warranty, the part must be intact 

and complete, without evidence of misuse or abuse, freight prepaid.

Seller shall not be liable for consequential damages of any kind 

which occur during the course of installation of equipment, or which 

result from the use or misuse by Buyer, its employees or others of 

the equipment supplied hereunder, and Buyer’s sole and exclusive 

remedy against Seller for any breach of the foregoing warranty or 

otherwise shall be for the repair or replacement of the equipment 

or parts thereof affected by such breach.

The foregoing warranty shall be valid and binding upon Seller if and 

only if Buyer loads, operates and maintains the equipment supplied 

hereunder in accordance with the instruction manual provided to 

Buyer. Seller does not guarantee the process of manufacture by 

Buyer or the quality of product to be produced by the equipment 

supplied hereunder and Seller shall not be liable for any prospective 

or lost profits of Buyer.

THE FOREGOING WARRANTY IS EXCLUSIVE AND IN LIEU OF 

ALL OTHER EXPRESS AND IMPLIED WARRANTIES WHATSO-

EVER. SPECIFICALLY THERE ARE NO IMPLIED WARRANTIES 

OF MERCHANTABILITY OR OF FITNESS FOR A PARTICULAR 

PURPOSE.

The foregoing shall be Seller’s sole and exclusive obligation and 

Buyer’s sole and exclusive remedy for any action, whether in breach 

of contract or negligence. In no event shall seller be liable for a sum 

in excess of the purchase price of the item.

Model No. 

Modéle No. 

Serial No. 

Serié No. 

Installation Date 

Date d'installation

MIDDLEBY MARSHALL  

N

o

 Q

uibble

 l

imited

 W

arraNty

 

(U.S.A. O

nly

)

MIDDLEBY MARSHALL, HEREINAFTER REFERRED TO 

AS “THE SELLER”, WARRANTS EQUIPMENT MANUFAC-

TURED BY IT TO BE FREE FROM DEFECTS IN MATERIAL 

AND WORKMANSHIP FOR WHICH IT IS RESPONSIBLE.  

THE SELLER’S OBLIGATION UNDER THIS WARRANTY 

SHALL  BE  LIMITED  TO  REPLACING  OR  REPAIRING, 

AT SELLER’S OPTION, WITHOUT CHARGE, ANY PART 

FOUND TO BE DEFECTIVE AND ANY LABOR AND MATE-

RIAL EXPENSE INCURRED BY SELLER IN REPAIRING 

OR REPLACING SUCH PART.  SUCH WARRANTY SHALL 

BE  LIMITED  TO  THE  ORIGINAL  PURCHASER  ONLY 

AND  SHALL  BE  EFFECTIVE  FOR  A  PERIOD  OF  ONE 

YEAR FROM DATE OF ORIGINAL INSTALLATION, OR 18 

MONTHS FROM DATE OF PURCHASE, WHICHEVER IS 

EARLIER, PROVIDED THAT TERMS OF PAYMENT HAVE 

BEEN FULLY MET.  

This  warranty  is  valid  only  if  the  equipment  is  installed, 

started, and demonstrated under the supervision of a factory-

authorized installer. 

Normal maintenance functions, including lubrication, clean

-

ing, or customer abuse, are not covered by this 

no quibble 

warranty

Seller shall be responsible only for repairs or replacements of 

defective parts performed by Seller’s authorized service per

-

sonnel.  Authorized service agencies are located in principal 

cities throughout the contiguous United States, Alaska, and 

Hawaii.  This warranty is valid in the 50 United States and 

is void elsewhere unless the product is purchased through 

Middleby International with warranty included. 

The foregoing warranty is exclusive and in lieu of all 

other warranties, expressed or implied.  There are no 

implied warranties of merchantability or of fitness for a 

particular purpose. 

The  foregoing  shall  be  Seller’s  sole  and  exclusive  obliga-

tion and Buyer’s sole and exclusive remedy for any action, 

including breach of contract or negligence.  In no event shall 

Seller be liable for a sum in excess of the purchase price of 

the item.  Seller shall not be liable for any prospective or lost 

profits of Buyer. 

This warranty is effective on Middleby Marshall equip-

ment sold on, or after, February 15, 1995.

©  2012 - Middleby Marshall, A Middleby Company.                  

The Middleby Marshall logo is a registered trademark of Middleby Marshall, A Middleby Company. 

Middleby Marshall Inc.  •  1400 Toastmaster Drive  •  Elgin, Illinois  60120-9272 U.S.A. •  (847) 741-3300  •  FAX: (847) 741 4406 

Содержание PS740 Series





































Отзывы: