background image

 

iv 

Model No. _________________________ 

Serial No. _________________________ 

Installation Date____________________ 

 

MIDDLEBY MARSHALL 

N

Q

UIBBLE 

L

IMITED 

W

ARRANTY

 

(U.S.A.

 

O

NLY

MIDDLEBY MARSHALL HEREINAFTER REFERRED TO AS
“THE SELLER”, WARRANTS EQUIPMENT MANUFAC-
TURED BY IT TO BE FREE FROM DEFECTS IN MATERIAL
AND WORKMANSHIP FOR WHICH IT IS RESPONSIBLE.
THE SELLER’S OBLIGATION UNDER THIS WARRANTY
SHALL BE LIMITED TO REPLACING OR REPAIRING AT
SELLER’S OPTION, WITHOUT CHARGE, ANY PART
FOUND TO BE DEFECTIVE AND ANY LABOR AND
MATERIAL EXPENSE INCURRED BY SELLER  IN
REPAIRING OR REPLACING SUCH PART. SUCH
WARRANTY SHALL BE LIMITED TO THE ORIGINAL
PURCHASER ONLY AND SHALL BE EFFECTIVE FOR A
PERIOD OF ONE YEAR FROM DATE OF ORIGINAL
INSTALLATION OR 18 MONTHS FROM DATE OF
PURCHASE, WHICHEVER IS EARLIER, PROVIDED THAT
TERMS OF PAYMENT HAVE BEEN FULLY MET. 
 
This warranty is valid only if the equipment is installed, started,
and demonstrated under the supervision of a factory-
authorized installer. 
 
Abuse, acts of God, belt jams, cleaning, customer abuse,
insufficient utilities, lubrication, maintenance, non-oven related
issues, preventative maintenance, or normal maintenance
function including adjustment of airflow, burners, conveyor
components, door mechanisms, microswitches, pilot burners,
thermostats, and replacement of bushings, light bulbs, fuses,
indicating lights and wear points, are not covered by this 

no

quibble limited warranty. 

 

 
Seller shall be responsible only for repair or replacement of
defective parts performed by Seller’s authorized service
personnel.  Authorized service companies are located in
principal cities throughout the contiguous United States,
Alaska, and Hawaii.  This warranty is valid in the 50 United
States and is void elsewhere unless the product is purchased
through Middleby International with warranty adder included. 
 

The foregoing warranty is exclusive and in lieu of all other
warranties, expressed or implied.  There are no implied
warranties of merchantability or of fitness for a particular
purpose. 
 

The foregoing shall be the Seller’s sole and exclusive
obligation and Buyer’s sole and exclusive remedy for any
action, including breach of contract or negligence. In no event
shall Seller be liable for a sum in excess of the purchase price
of the item. Seller shall not be liable for any prospective or lost
profits of the buyer. 
 

This warranty is effective on Middleby Marshall equipment
sold on, or after January 1

st

, 2007. 

 

© 

2018 - Middleby Marshall, A Middleby Company.

 

 

 

MIDDLEBY MARSHALL 

OVEN LIMITED WARRANTY 

(Non U.S.A.) 

The Seller warrants equipment manufactured by it to be free
from defects in material and workmanship for which it is
responsible.  The Seller’s obligation under this warranty shall be
limited to replacing or repairing, at Seller’s option, without
charge, F.O.B. Seller’s factory, any part found defective and
any labor and material expense incurred by Seller in repairing
or replacing such part. Such warranty is limited to a period of
one year from the date of original installation or 15 months from
date of shipment from Seller’s factory, whichever is earlier,
provided that terms of payment have been fully met. All labor
shall be performed during regular working hours. Overtime
premium will be charged to the Buyer. 

This warranty is not valid unless equipment is installed,
started, and demonstrated under the supervision of a
factory-authorized installer.

  

Normal maintenance functions including lubrication, adjustment
of airflow, thermostats, door mechanisms, microswitches,
burners and pilot burners, and replacement of light bulbs, fuses,
and indicating lights, are not covered by warranty. 

Any repair or replacement of defective parts shall be performed
by Seller’s authorized service personnel. Seller shall not be
responsible for any costs incurred if the work is performed by
anyone other than the Seller’s authorized service personnel. 

When returning any part under warranty, the part must be intact
and complete, without evidence of misuse or abuse, freight
prepaid. 

Seller shall not be liable for any consequential damages of any
kind which occurs during the course of installation of equipment,
or which results from the use or misuse by Buyer, its
employees, or others, of the equipment supplied hereunder, at
Buyer’s sole and exclusive remedy against Seller for any
breach of the foregoing warranty or otherwise shall be for the
repair or replacement of the equipment or parts thereof affected
by such breach. 

The foregoing warranty shall be valid and binding upon Seller if
and only if Buyer loads, operates and maintains the equipment
supplied hereunder in accordance with the instruction manual
provided to Buyer. Seller does not guarantee the process of
manufacture by Buyer or quality of product to be produced by
the equipment supplied hereunder and Seller shall not be liable
for any prospective or lost profits of Buyer. 

The foregoing shall be Seller’s sole and exclusive obligation
and Buyer’s sole and exclusive remedy for any action, whether
in breach of contract or negligence. In no event shall Seller be
liable for a sum in excess of the purchase price of the item.  

THE FOREGOING WARRANTY IS EXCLUSIVE AND IN LIEU
OF ALL OTHER EXPRESS AND IMPLIED WARRANTIES
WHATSOEVER, SPECIFICALLY THERE ARE NO IMPLIED
WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE.  

 

 

 

 

 
Middleby Cooking Systems Group  

  1400 Toastmaster Drive  

  Elgin, IL 60120  

  (847) 741-3300  

  FAX (847) 429-7508 

www.middleby-marshall.com

 

 

 

Содержание PS638 Series




















































Отзывы: