ATTACHING CAT-6 RETRACTOR TO THREADED INSERTS ON BACK OF LOWER PANEL
THREADING THE CAT-6 CABLE AND INSTALLING AVIP PLATES
• Use a power driver, #2 Philips bit, and
(2x) 10-32 x ½” screws (D) to attach the Cat 6 retractor (E)
to the threaded inserts on the back of the lower panel
of your cart as shown. (
FIGURE D
)
Page 5
FIGURE D
Back of
Lower
Panel
E
D
FIGURE E
C
SCALE 0.500
C
1. Carefully pull at the Cat 6 cable and thread it under the roller on the roller bracket (C) and through the
knockout openings as shown. (
FIGURE E
)
