ASSEMBLY (CONTINUED)
10) With sliding carriage extended, position the SRSR base inside the credenza for mounting.
(FIGURE G)
11) Align SRSR base mounting holes with credenza mounting holes and secure SRSR base to
credenza using eight (8) 1/4” - 20 machine screws and eight (8) 1/4” - 20 flange nuts.
(FIGURE G)
Page 5
FIGURE G
CREDENZA MOUNTING HOLES
CAUTION!
Failure to install all required hardware may result in damage to the equipment
and possible injury to the user.
!
12) Place rack frame on sliding carriage
using provided handles.
(FIGURE F)
NOTE:
Mounting studs on underside
of rack frame must be inserted into
mounting holes in sliding carriage.
13) Re-install the rack frame to the sliding carriage
using four (4) wing nuts.
(FIGURE F)
14) Depress the lockout lever on the front of the sliding
carriage and push the rack frame into the credenza.
FLANGE NUTS 1/4” - 20 (8)
MACHINE SCREWS
1/4” - 20 (8)
SRSR BASE MOUNTING HOLES (8)
▲
▲
▲
▲
▲
▲
▲
▲
LOCKOUT LEVER
