INSTALLING LEVER LOCK OPTION INSIDE SLIDE-OUT RACK (CONTINUED)
Page 12
WARRANTY
For warranty information, refer to legrandav.com/policies/warranty_information.
Corporate Headquarters
P: (866) 977-3901 | F: (877) 894-6918 | legrandav.com | [email protected]
Middle Atlantic Canada
P: (888) 766-9770 | F: (888) 599-5009 | ca.middleatlantic.com | [email protected]
Middle Atlantic EMEA Technical Support
P: +31 495-726-003 | [email protected]
Factory Distribution
United States: New Jersey, California, and Illinois | Canada: Ontario | The Netherlands: Weert
At Legrand AV Inc. we are always listening. Your comments are welcome.
Legrand AV is an ISO 9001 and ISO 14001 Registered Company.
7. Use (4x) 10-32 x ¾” truss screws with washers (L) to
secure the face after panel (S) to the rack as shown.
(
FIGURE N
)
8. Re-install the slide-out rack into your
credenza by reversing the first
step of this topic on page 9.
FIGURE N
L
S
UNDERSTANDING NEXT STEPS
If your installation includes a purchased fan kit and/or a large cover option (for your purchased display
option), after installing this and any other options you may have purchased for your credenza, refer to
the C3 Series WoodKit instruction sheet (100-00040) to install your woodkit, and then refer to the C3
Series Fan Kit (C3-FANKIT) instruction sheet (100-00039) and/or C3 Series Display Mount Large
Cover Option instruction sheet (100-00035) to install your fan kit and/or your large cover option,
respectively.
NOTE
:
• Kits and options other than the fan kit and large cover option should be installed before your woodkit
is attached to the frame.
• Attaching your display(s) (display(s) not included) to the horizontal extrusion of the display mount
option (C3-XX-LDXU, if purchased) must be done as the final part of your C3 installation process. For
more information, refer to "Attaching Your Display to the Horizontal Extrusion" on page 11 of the C3
Series Display Mount Option (C3-XX-LDXU) Instruction Sheet (100-00034).
