Middle Atlantic Products Cool Series Скачать руководство пользователя страница 8

THERM-A

-  Optional  thermostat for greater control 

of activation  temperature

WARRANTY

Middle Atlantic  Products,  Inc.  (the  "Company") warrants the  DUCT-COOL to  be free from defects in  material or workmanship under normal  use and 

conditions for (3) years from date  of shipment by the  Company.

The  Company's entire  liability to the  purchaser,  and the  purchaser's (or any other party's)  sole and  exclusive  remedy,  under this warranty shall  be 

limited,  at the  Company's option, to  either (a) return  of and  refund  of the  price  paid for,  or (b) repair or replacement at the  Company's factory of the 
products purchased,  or any  part or parts thereof,  which the  Company  has determined to  be defective  after inspection thereof at the  Company's factory.

This warranty does not cover damage  due to acts of God,  accident,  misuse,  abuse  or negligence  by parties other than the  Company,  or any 

modification  or alteration of the  products.  In  addition,  this warranty does not cover damage due to  improper handling,  assembly,  installation  or 
maintenance.

THIS WARRANTY IS  IN  LIEU  OF ALL OTHER WARRANTIES  OF ANY KIND,  EITHER  EXPRESSED  OR  IMPLIED,  INCLUDING,  BUT NOT  LIMITED 
TO,  IMPLIED WARRANTIES  OF  MERCHANTABILITY AND  FITNESS  FOR A PARTICULAR  PURPOSE.

TO THE  MAXIMUM  EXTENT  PERMITTED  BY APPLICABLE  LAW,  IN  NO  EVENT SHALL THE  COMPANY BE  LIABLE  FOR ANY SPECIAL, 

INCIDENTAL,  INDIRECT,  OR  CONSEQUENTIAL  DAMAGES WHATSOEVER  (INCLUDING,  WITHOUT LIMITATION,  DAMAGES  FOR  LOSS  OF 
BUSINESS  PROFITS,  BUSINESS  INTERRUPTION  OR ANY OTHER  PECUNIARY LOSS) ARISING  OUT OF THE  USE  OF  THE  PRODUCTS 
PURCHASED,  EVEN  IF THE  COMPANY  HAS  BEEN ADVISED  OF THE  POSSIBILITY OF  SUCH  DAMAGES.  THE  COMPANY'S  LIABILITY TO 

THE  PURCHASER  (OR ANY OTHER  PARTY)  HEREUNDER,  IF ANY,  SHALL  IN  NO  EVENT  EXCEED  THE  PURCHASE  PRICE  OF THE  PRODUCTS 

PAID TO THE COMPANY

Corporate Headquarters

Corporate Voice 973-839-1011  - Fax 973-839-1976 / International Voice  +1  973-839-8821  -  Fax +1  973-839-4982 
middleatlantic.com - [email protected]

Middle Atlantic Canada

Voice  613-836-2501  - Fax 613-836-2690 / middleatlantic.ca - [email protected]

Factory Distribution

USA:  NJ  - CA -  IL Canada:  ON  - BC

A t Middle Atlantic Products we are always listening.  Your comments are welcome 

Middle Atlantic Products is an ISO 9001  and  ISO 14001  Registered Company.

Page  8

30%  Recycled  Paper

Содержание Cool Series









Отзывы: