Installation and Service Instructions
12 01
8471 24
Printed in U.S.A.
In the United States,
Installation must
conform with local codes or, in the absence of local
codes, with Installation of the
National Fuel Gas
Code, ANSI Z223.1-latest edition,
from the American
National Standard Institute. Further reference should
be made to the recommendation of your fuel supplier.
In Canada
,
Installation must conform with local
codes or, in the absence of local codes, with
Installation Codes for Gas Burning Appliances and
Equipment, CGA Standard CAN/CGA 1B-149.
Further reference should be made to the
recommendation of your fuel supplier.
WARNING: Additions, changes, conversions,
and service must be performed by an authorized
MIDCO representative, service agency, or the fuel
supplier. Use only MIDCO specified and approved
parts.
INSTALLER: Inform and demonstrate to the user
the correct operation and maintenance of the gas
utilization equipment. Inform the user of the
hazards of storing flammable liquids and vapors in
the vicinity of this gas utilization equipment and
remove such hazards. Affix this manual and
associated literature adjacent to the burner. CODE
COMPLIANCE IS THE SOLE RESPONSIBILITY OF
THE INSTALLER.
USER: Retain this manual for future reference. If
other than routine service or maintenance as
described in this manual and associated literature
is required, contact a qualified service agency. DO
NOT ATTEMPT REPAIRS. An inadvertent service
error could result in a dangerous condition.
Economite
RE4850BA / RE4700BA
RE4400B / RE4400BA
G a s B u r n e r s
BURNER MODEL
BILL OF MAT'L
NUMBER
SERIAL CODE #
WIRING DIAGRAM
FOR SERVICE CONTACT:
Name
Address
Phone
Date of Installation
Do not store or use gasoline or other flammable
vapors and liquids in the vicinity of this or any
other appliance.
WHAT TO DO IF YOU SMELL GAS:
?
Do not try to light any appliance.
?
Do not touch any electrical switch;do not use any
phone in your building.
?
Immediately phone your gas supplier from another
building. Follow the gas supplier’s instructions. If
you cannot reach your gas supplier call the fire
department.
Installation and service must be performed by a
qualified installer, service agency or the gas supplier.
The following terms are used to identify hazards, safety precaution of special
notations and have standard meanings throughout this manual. They are printed in all capital letters using a bold type face
as shown below, and preceded by the exclamation mark symbol. When you see the safety alert symbol and one of the
safety information terms as shown below, be aware of the hazard potential.
DANGER
: Identifies the most serious hazards which
will
result in severe personal injury or death.
WARNING
: Signifies a hazard that
could
result in personal injury or death.
CAUTION
: Identifies unsafe practices which would result in minor personal injury or product and property damage.
WARNING
: If the information in these instructions
is not followed exactly, a fire or explosion may result,
causing property damage, personal injury or death.
Midco International Inc.
4140 West Victoria St. - Chicago, Illinois 60646
tel 773.604.8700 fax 773.604.4070
web www.midco-intl.com e-mail [email protected]
Q u a l i t y D e s i g n e d f o r P r o v e n P e r f o r m a n c e
