Midas XL8 DL461 Скачать руководство пользователя страница 54 | Manualshive

Страница: 54 / 64

background image

40

Appendix D: Setting Up An XL8 System

DL461 Router

Operator Manual

>> To connect the routers to the Stage rack 3 units

•

Mic splitters:

In

AES50 audio - bank 1

on the X router, connect sockets 3 and 4

to the

AES50 audio - A

X sockets on the mic splitters. Repeat for the Y router,

using the mic splitters’ Y sockets.

•

Line I/O unit:

In

AES50 audio - bank 1

on the X router, connect socket 6 to the

AES50 audio

X socket on the line I/O unit. Repeat for the Y router, using the

line I/O units’ equivalent Y socket.

>> To connect the XL8 to the line I/O units (FOH rack)

Connect the

AES50 audio

X sockets on the rear of the XL8 Control Centre to the

AES50 audio

X socket on both of the line I/O units in the FOH rack. Repeat for the Y

sockets.

>> To connect the XL8 to the RAPIDE

Connect one of the eight

ETHERNET

(EtherCon® XLR) sockets on the rear of the

RAPIDE unit to the

Ethernet control 1

socket of the active network (X or Y) on the

rear of the XL8 Control Centre (see “XL8 system interconnections” on page 42).

>> To daisy chain the DSP units

Important Note:
Do not connect a cable to like numbered sockets, that is, “0” to “0” or “1” to
“1”, as the DSPs will not work; socket numbers are printed to the right of each
socket.

There are two default configurations available, depending on the lengths of the
interconnecting DSP cables supplied, that is, 0.25 m cables or 0.5 m cables. Both
options contain a long cable for connecting the top and bottom units, and the 0.25 m
option has an additional long cable for connecting units AMU 2 and AMU 9.

A cable’s length (cm) can be determined from a three-digit number contained
within its part number (printed on a label attached to the cable). For example, in
a part number of “14150-EZBB-050-0LC 060425TD” the “-050-” indicates a
length of 50 cm.

Connect the DSPs together as shown in the following diagram, according to the cables
supplied with your system. (In the diagram, the cables are coloured and the sockets
numbered to help distinguish them.)

«
...
52
53
54
55
56
...
»

Содержание XL8 DL461

































































Отзывы:

Нет отзывов

Похожие инструкции для XL8 DL461

Бренд: Xtreamer Страницы: 2

Бренд: GCAN Страницы: 16

Бренд: µ-Dimension Страницы: 17

Бренд: µ-Dimension Страницы: 16

Бренд: µ-Dimension Страницы: 6

Бренд: µ-Dimension Страницы: 8

Бренд: Konig Страницы: 30

Бренд: K&S BASIC Страницы: 17

Бренд: UNICOM Страницы: 1

Бренд: Pyramid Страницы: 39

CSI 23KTL-CT/US-480

Бренд: CanadianSolar Страницы: 88

Бренд: Pro-Ject Audio Systems Страницы: 20

Бренд: Planet Страницы: 20

Бренд: Majella Страницы: 6

Бренд: Hagstrom Страницы: 24

GTV-192KUSB-2-ADAUD

Бренд: GefenTV Страницы: 36

Бренд: Radial Engineering Страницы: 11

Бренд: GarrettCom Страницы: 60

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды