Midas Pro 6 DL351, Руководство оператора

Страница: 33 / 70

Main menu options
17
DL351 Modular I/O
Operator Manual
Main menu options
The following subsections describe the function of each main menu and how to use
them for setting up, configuration, checking etc.
While carrying out the configuration procedures detailed in this section, refer to the
main menu flowchart (see “Main menu flowchart” on page 11).
The selection procedure described for each option assumes that you are initially in
normal operation mode.
To check the current configuration of an option, that is, what parameter is
selected, enter the option and navigate to the option you require. You can then
change the selection, if required, or exit using the MENU button.
Option 1 — AES clock
You can set up the clock source (as internal or external) of the DL351 Modular I/O for
AES synchronisation.
>> To set up the clock source
1
Enter the main menu, as described in “To enter the main menu” on page 16. This
will take you straight to main menu option 1 (AES clock) screen.
2
Press SELECT to enter the AES clock option. This will take you to the “Internal
clock” option.
3
Use the up/down arrow buttons to go to the option you require, that is, “Internal
clock” or “External clock”.
4
Do one of the following:
• If the option is already selected (not flashing), go to the next step.
• If the option is not selected (flashing), press SELECT to select this option.
The display will briefly show “Saving new setting” and then revert to the
option again. However, it will not be flashing, as it is now the current
selection.
5
Press MENU to exit the submenu and go back to the option 1 screen.
Option 2 — Set ID
This option allows you allocate a unique ID to the DL351 Modular I/O unit, which can be
either 1 or 2. The PRO6 Live Performance System network will then recognise the unit
from its ID number.
>> To set up the ID of the unit
1
Enter the main menu, as described in “To enter the main menu” on page 16.
2
Use the up/down arrow buttons to go to option 2 (set ID).
3
Press SELECT to enter the set ID option. This will take you to the “Select ID”
screen for ID 1.
4
Use the up/down arrow buttons to go to the ID number you require.