Mid-Continent Instrument True Blue Power TA360 Series, Руководство по установке и эксплуатации

Страница: 9 / 16

8 Manual Number 9019411 • Revision C, June 30, 2020
SECTION 3 INSTALLATION
3.1 GENERAL INFORAMTION
This section contains interconnect diagrams, mounting dimensions and other information
pertaining to the installation of the TA360 Single and Dual USB Charger. After installation of
cabling and before installation of the equipment, ensure that power and ground are applied to the
proper pins specified in Section 3.3.2, Pin Assignment Information.
3.2 UNPACKING AND INSPECTING EQUIPMENT
When unpacking this equipment, make a visual inspection for evidence of any damage that may
have occurred during shipment. The following parts should be included:
A. High Power USB Charging Port MCIA P/N 6430360-( )
B. Installation Manual MCIA P/N 9019411
C. Connector Kit MCIA P/N 9017960
i. Mating Connector, 2-pin
ii. Pins (4) (2 required, 2 spares)
iii. Screws, #4-40 x 1/4 flat-head (2)
iv. Screws, #4-40 x 5/16 flat-head (2)
Optional Equipment Available:
A. Dual Port Instrument Mount Adapter Kit MCIA P/N 9017947
B. Single Port Rear Mount Faceplate Kit MCIA P/N 9019351-1
C. Dual Port Rear Mount Faceplate Kit MCIA P/N 9017958
D. Single Port Rear Mount Circular Faceplate MCIA P/N 9019384-3
E. Dual Port Rear Mount Circular Faceplate MCIA P/N 9019384-4
Equipment Not Provided:
A. Cable Harness Wire See Section 3.3.1 for specifications
B. Circuit Breaker Recommendation 5 amp
3.3 CABLE HARNESS
Construct the cable harness following the instructions outlined below and per Figure 3.1.
Refer to Section 2: Pre-Installation Considerations, for routing precautions.
Wire Gauge Selection
Use of PTFE, ETFE, TFE, Teflon or Tefzel insulated wire is recommended for aircraft use.
The wire harness should utilize 20-24 AWG stranded wire. Refer to table 3.1 below. This
table is provided to aid in the consideration of voltage drop due to harness length. Any
other wiring standards that are applicable to the installation should also be considered.
Wire Gauge Wire Length
20 AWG stranded wire 18 ft
22 AWG stranded wire 11 ft
24 AWG stranded wire 7 ft
Table 3.1
Wire Gauge and Length