6 Manual Number 9019411 • Revision C, June 30, 2020
SECTION 2 PRE-INSTALLATION
2.1
COOLING
No external cooling is required. The unit will become warm when in use. This is normal and within
operational parameters. No special mounting considerations are required; however, mounting to a
metal surface can help dissipate any heat generated and extend the life of the product.
2.2
EQUIPMENT LOCATION
The TA360 High Power USB Charging Port is designed for mounting flexibility, allowing for
installation in the cockpit or in the cabin. It is designed for panel mounting and can be installed in
a rectangular configuration or, with an available installation kit, can be mounted with a round or
rectangular cosmetic cover plate. An instrument mounting adapter bracket is also available to
easily mount the unit in a standard 2-inch round instrument opening that may already exist in the
cockpit panel.
The unit can be mounted in any orientation. Clearance should be provided for the mating
connector which may require up to an additional inch beyond the rear of the unit.
2.3
ROUTING OF CABLES
Avoid sharp bends in cabling and routing near aircraft control cables. Avoid close proximity and
contact with aircraft structures, avionics equipment or other obstructions that could chafe wires
during flight and cause undesirable effects.
2.4
LIMITATIONS
Environmental qualifications were verified per RTCA DO-160, Revision G in lieu of those identified
within the minimum performance standards (MPS) of the TSO.
The conditions and tests for TSO approval of this article are minimum performance standards.
Those installing this article, on or in a specific type or class of aircraft, must determine that the
aircraft installation conditions are within the TSO standards, specification of the article and
deviations as listed above. TSO articles must have separate approval for installation in an aircraft.
The article may be installed only according to 14 CFR part 43 or the applicable airworthiness
requirements.
The USB PD is an extremely capable new technology for personal electronic devices. Beyond the
physical format of the Type-C connector, it also allows for a variety of interface options when
communicating with compatible devices. This device-to-charger communication is defined within
the USB 3.1 Specification and Power Delivery standards. However, manufacturers of consumer
electronic devices and/or cables may choose to implement proprietary versions or modifications of
the USB standards to operate specifically with their own charging equipment. The TA360 has
been tested with and supports a wide variety of devices now emerging on the open market.
However, compatibility with all devices may not be guaranteed. True Blue Power continues to be
proactive in evaluating new devices and strives to continually improve the product as needed to
serve the vast majority of USB-charged electronic products.
Содержание True Blue Power TA360 Series
Страница 1: ...Revision C June 30 2020...
