MT710 User Manual V1.0
http://www.mictrack.com
5
Note:
When the device detects continuous vibration for more than 1 minute, it will wakes
up and starts to connect to the network, After connected it will Immediately report a data
to the platform;
If the device is still in a vibrating state, MT710 will report to server every 60 seconds
If there is no vibration more than 7 minutes:
1>During In the 7 minutes, if no report data it will go to sleep soon.
2>During In the 7 minutes, if have report data and after send out last location, it will
wait for 3 minutes and then go to sleep again. T is [60-600]
seconds
8.4.5 MODE 5 (WiFi Only Mode)
SMS Command format: MODE,5,password,T, X, Y
For examples: MODE,5,0000,5,0,1
Reply: SET TRACKER MODE:5 OK
Note
: 1. T is report interval time and the range is [1,60]
minutes
.
2. X fix to 0.
3. Y=0 means TCP will wake-up only when report interval time is arrive; Y=1 means
TCP will always connected.
8.4.6 MODE 6 (SMS Only Mode)
SMS Command format: MODE,6,password
For examples: MODE,6,0000
Reply: SET TRACKER MODE:6 OK
In this mode if user send text command “
WHERE0000
” to unit,it will reply SMS as follow:
ID:866770057542798
Date:10:30:45 06/10/2022
Fix:A State:SMS
http://maps.google.com/maps?q=+22.64766%2c+114.03423
8.4.7 MODE 0 (AUTO Mode)
SMS Command format: MODE,0,password,T1,T2
For examples: MODE,0,0000,60,1
Reply: SET TRACKER MODE:0 OK
Note:
This is mix mode of Mode 3 and mode 4. T1 is [60-600]
seconds
, T2 is [1-24]
hours
;
When device is still it will run as Mode 3 and when device detect to vibrate it will run as
Mode 4.
8.5 Set Protocol
SMS Command format: #800#password#X##
For examples: #800#0000#TCP##
Reply: SET SERVER TYPE OK
Note: X=TCP mean setup to TCP protocol, X=UDP means set to UDP Protocol.
8.6 Set AGPS
Disable AGPS Location :190+password
For examples:1900000
