MT710 User Manual V1.0
http://www.mictrack.com
4
Reply:SET USER PASSWORD OK.
Note:
Default password is 0000
8.2 Set APN (Access Point Name)
SMS Command format 1: #803#password#APN##
For example : #803#0000#nbiot##
SMS Command format 2: #803#password#APN#APN user name#APN password##
For example: #803#0000#CMNET#INTERNET#INTERNET##
Reply: SET GPRS APN OK
8.3 Set IP and port
SMS Command format : #804#password#IP address(or domain) #port##
For example : #804#0000#e.trackits.com#7700##
Reply: SET SERVER IP AND PORT OK.
8.4 Working Mode
8.4.1 MODE 1 (Real Time Mode)
SMS Command format: MODE,1,password,T
For examples: MODE,1,0000,60
Reply: SET TRACKER MODE:1 OK
Note:
The device will report data every 60s .T is interval time and the range is [60-600]
seconds
. On this mode, GPS and TCP will always on
8.4.2 MODE 2 (GPS Auto Mode)
SMS Command format: MODE,2,password,T, X, Y
For examples: MODE,2,0000,10,1,1
Reply: SET TRACKER MODE:2 OK
Note:
1. T is report interval time and the range is [10,60]
minutes
.
2. X=0 means GPS will wake-up only when report interval time is arrive; X=1 means
GPS will always on,.
3.
Y=0 means TCP will wake-up only when report interval time is arrive; Y=1 means
TCP will always connected,.
8.4.3 MODE 3 (Deep Sleep Mode)
SMS Command format: MODE,3,password,T
For examples: MODE,3,0000,1
Reply: SET TRACKER MODE:3 OK
Note:
Device will wake up and report one data to server every 1 hour, after that it will
go to sleep again until next 1 hour. T is [1-24]
hours
.
8.4.4 MODE 4 (Vibrate Mode)
SMS Command format: MODE,4,Password,T
For examples: MODE,4,0000,60
Reply: SET TRACKER MODE:4 OK
