General Safety Summary
General Safety Summary
Please read the following safety precautions carefully to avoid personal injury and
prevent damage to this product or any product connected to this product.
To avoid possible danger, be sure to use this product as prescribed.
Only qualified personnel should perform repair procedures.
Avoid fire or personal injury
Connect and disconnect devices properly.
*
Do not plug or unplug probes or test leads while they are connected to a voltage source
*
Power off the circuit under test before connecting or disconnecting the current probe.
*
Before connecting the probe to the circuit under test, please connect the probe output to
the measuring instrument.
*
Before connecting the probe input, please connect the probe reference lead to the circuit
under test.
*
Before disconnecting the probe from the measuring instrument, please disconnect the probe
input end and the probe reference lead from the circuit under test.
Observe all terminal ratings.
To avoid fire or electric shock, observe all product ratings and
markings. Before making connections to the product, please consult the product user manual
for details on ratings. Do not connect the current probe to any wire with a voltage exceeding
its rating.
Do not disassemble the machine.
Do not use the product for measurements with covers
or panels open.
Do not operate the product when it is suspected that the product is malfunctioning.
Have it inspected by service personnel designated by Micsig.
Keep away from exposed circuits.
Do not touch exposed wiring and components while
the power is on.
Do not operate in wet environments.
Do not operate in flammable and explosive environments.
Please keep the product surface clean and dry.
ii
Terms in this manual
WARNING: A "WARNING" statement identifies conditions or actions that could result
in personal injury or life-threatening conditions.
CAUTION: A
“
CAUTION
”
statement identifies conditions or actions that could
cause damage to this product or other property.
