MICROWELL DRY 1200 METAL, Инструкция по установке и эксплуатации

Страница: 9 / 64

Installation and user manual D R Y 8 0 0 / 1 2 0 0 M e t a l
V01/2022 | 9
3.1
Description of basic parts
Legend:
1 –
Air exhaust
2 – Air suction
3 – Mechanical humidistat (on the bottom)
4
– Metal cover
5 – Possible heating water supply from the right / left side ½ “(on request as accessory)
6 – Possible heating water supply from the back ½ “(on request as accessory)
7
– Fresh air supply Ø 100 mm (on request as accessory)
8 – Condensate drain Ø outer
20
mm ( Ø inner 16 mm)
9 – Power supply 230 V
10 - position (under the cover) of the connection box for the main power supply
11 -
position (under cover) of the fan mode switch
12 - position of the cover fixing screws
13 - Built-in digital humidistat and thermostat
14 - Feet
15 - position of the nut for screwing the locking L-pieces to the wall
3.2 Fresh air supply (on demand as accessory)
Each MICROWELL DRY dehumidifier has the option of fresh air supply. The air supply is located below
the condenser, which effectively heats the incoming fresh air due to heat recovery.
The metal fresh air connection is supplied already mounted on the dehumidifier, but towards the
inside. When installing the dehumidifier, it is necessary to remove the flange to wind it correctly
(opposite to the one supplied). For example, a plastic pipe is then mounted on the flange, which
conducts the air through the wall.
1
2
1
7
2
12
5
6
8 9
4
10
11
15
13
12
14