MICROWELL DRY 1200 METAL, Инструкция по установке и эксплуатации

Страница: 59 / 64

Installation and user manual D R Y 8 0 0 / 1 2 0 0 M e t a l
V01/2022 | 5 9
8 WARRANTY CONDITIONS
The device is covered by a warranty period of 2 years. The warranty period can be extended by your
reseller. Please contact your reseller or distributor if the warranty should be applied to the
dehumidifier.
Use the following Microwell disclaimer under warranty. No claim will be accepted if:
1. The dehumidifier was used incorrectly, other than as described in this manual or in violation
of this user manual, resp. against the safety precautions listed in this manual.
2. The dehumidifier has been installed incorrectly, other than as described in these operating
instructions or in violation of this user manual.
3. The dehumidifier has been put into operation by an unauthorized person.
4. The air flow in the dehumidifier is outside the defined limits.
5. The device has been subjected to mechanical damage / forcible or any unauthorized action
has been taken on the design of the unit - welding, soldering or mechanical damage by
scratches, mixtures, compression, pipe rupture, etc. Without mechanical damage, the
complaint is accepted, unless a written complaint is made with the equipment supplied by
the carrier.
6. The chemical conditions in the pool were not within the defined limits (see the table of
permitted chemical values below).
7. The dehumidifier has been exposed to frost or high temperatures outside the operating
temperature range.
8. Power supply. voltage insufficient or otherwise incorrect.
Acidity / pH level: pH 7,4 +/- 0,4
Total alkalinity, CaCO3 ppm 80-120
Total hardness, CaCo3 ppm 100-300
Total dissolved dry matter ppm max. 3000
Maximum salt content wt/wt 6%
Free chlorine range ppm 1,0-3,0
Superchlorination ppm max. 30 ppm/max. 24 hours
Bromine ppm 2-3
Baquacil ppm 25-50
Ozone ppm 0,8-1,0
Maximum copper content ppm max. 2
Aquamatic lone cleaner ppm max. 2
Tarn clean cleaner ppm max. 2
Sherwood cleaner ppm max. 2
Tab.: Permitted chemical value
When requesting warranty, contact your distributor and have the device identifiers
ready, i.e. model, serial number and date of purchase. Please describe the genesis
of the failure. This will speed up the complaint handling process.