![background image](http://html.mh-extra.com/html/microwave-radio-communications/strata/strata_operation-manual_1789800019.webp)
Strata Operations Guide
-
17 -
Step-by-Step Procedure
Use the following Strata configuration procedure when verifying or configuring the Strata TX system
using the
Strata TX Configurator
software over a local or remote serial data link.
1. Install the Strata Configurator software per instructions supplied with the software. This software is
designed to operate properly on Windows 32 bit operating systems, e.g., Windows 98/NT/2000/ or
XP operating systems.
2. Connect the PC serial port to the TCU or TXU per Figure 5. above. Apply the appropriate DC power
to the Strata TX radio system and operate the front panel power switch(s) to ON.
3. Start the Strata Configurator application. You should see the following main menu appear:
4. Click on the “Connect to Radio” control. The following dialog is presented.