Strata Operations Guide
-
8 -
RF Channel Select
The radio is pre-programmed with a number of RF channel frequencies associated with up to 9 preset
configurations. Use this feature to monitor the currently configured RF frequencies.
Note: If these
frequencies are known as part of a customer order, they may be factory set to customer requirements or
added or modified per customer request.
Select Preset Setting
Used to select a pre-configured configuration. Up to 9 different configurations may be stored and
configured in conjunction with the Strata TX Configurator utility.
Set Attenuation Value (Transmitter Back Off Level)
Used to set the transmitter output power (and linear operating point) of the radio system. Adjustable from
0 to 31 dB in 1 dB increments. Push to select.
Note:
Maximum power output occurs with 0 dB of attenuation applied.
75 Ohm Coax ON/OFF
Used to activate or de-activate DC powering a TCU or TXU through the inter-connecting IF coaxial
cable.
Front Panel Transmitter Power Monitoring
The current TX output power reading available on the front panel may be used as a general reference and
is accurate to /- 1 dB.
HPU Present
Identifies and configures use of the HPU option connected to the TXU device.
Please see the front panel menu guide on the following page for details related to front panel operation.
