iv
MDS 9810 Installation and Operation Guide
MDS 05-3301A01, Rev. C
mounted) the above separation distance must be maintained at all times. More information on RF
exposure is available on the Internet at
www.fcc.gov/oet/info/documents/bulletins
. This manual
is intended to guide a professional installer to install, operate and perform basic system mainte-
nance on the described radio.
CSA/
US
Notice
This product is available for use in Class I, Division 2, Groups A, B, C & D Hazardous Locations. Such
locations are defined in Article 500 of the National Fire Protection Association publication NFPA 70, oth-
erwise known as the National Electrical Code.
The product has been recognized for use in hazardous locations by the Canadian Standards Association
(CSA), which also issues the US mark of approval (CSA/
US
). The CSA Certification is in accordance with
CSA STD C22.2 No. 213-M1987. The product has been evaluated in accordance with the following stan-
dards:
•
CSA Std C22.2 No. 142-M1987 - Process Control Equipment
•
CSA Std C22.2 No. 213-M1987 - Non-Incendive Electrical Equipment for Use in Class I, Division 2
Hazardous Locations
•
ANSI/UL Std No. 508 - Industrial Control Equipment
•
UL Std No. 1604 - Electrical Equipment for Use in Class I and II, Division 2; Class III Hazardous (Clas-
sified) Locations
ISO 9001 Registration
Microwave Data Systems' adherence to this internationally accepted quality system standard pro-
vides one of the strongest assurances of product and service quality available.
MDS Quality Policy Statement
We, the employees of Microwave Data Systems, are committed to achieving total customer satis-
faction in everything we do.
Total Customer Satisfaction in:
• Conception, design, manufacture and marketing of our products.
• Services and support we provide to our internal and external customers.
Total Customer Satisfaction Achieved Through:
• Processes that are well documented and minimize variations.
• Partnering with suppliers who are committed to providing quality and service.
• Measuring our performance against customer expectations and industry leaders.
• Commitment to continuous improvement and employee involvement.
