MICROTRONIX DX-4400 Series, Руководство пользователя

Страница: 41 / 125

DX-4400
– 3G-SDI Text & Graphics Overlay Inserter – User Manual
Page 41 of 125
Table 14: PiP Size & Position Command Syntax
Parameters Description of Command Syntax
PPx
–
Pre-set PiP location for SDI input x where x = 1 or 2. Example: PP1 TR
location
Pre-set PiP location. It takes the following arguments:
TR (top right),
TL (top left),
BR (bottom right),
BL (bottom left),
BC (bottom center),
TC (top center),
CL (center left),
CR (center right) and
MS (middle screen).
The default is TL for PiP 1 and TR for PiP 2
PSx
–
Pre-set PiP Input x Size for SDI input x where x = 1 or 2
nn Pre-set PiP Size where nn = 1
– 16. The default is 16 for PiP 1 and 5 for PiP 2
PVx
–
Pre-set Vertical gap for SDI input x where x = 1 or 2
nnnn
Pre-set Vertical gap between the edge of the PiP window and the screen edge.
The screen edge reference is to left and right. The default is 0 for PiP 1 and 20 for PiP 2
PHx
–
Pre-set Horizontal gap for SDI input x where x = 1 or 2
nnnn
Pre-set Horizontal gap between the edge of the PiP window and the screen edge.
The screen edge reference is to top and bottom.
The default is 0 for PiP 1 and 11 for PiP 2
PCx
– Set a Custom PiP attributes for SDI input x where x = 1 or 2
X=
Sets the X Coordinate for the top left corner for the image.
The default value is 0. The PiP image cannot be placed off screen. The X parameter is
automatically reduced as required to keep the PiP on screen.
Y=
Sets the Y Coordinate for the top left corner for the image. The default value is 0.
The PiP image cannot be placed off screen. The Y parameter is automatically reduced as
required to keep the PiP on screen.
L=
Length is the horizontal distance the PiP window covers. The default value is 240.
The PiP cannot be wider than the screen width. The L parameter is automatically reduced to
the screen size.
H=
Height is the vertical-distance the PiP window covers. The default value is 130.
The PiP height cannot be larger than the screen height. The H parameter is automatically
reduced if it exceeds the screen height.
A=
Maintain the Aspect ratio of the PiP window according to the SDI input ratio.
The height is set referencing the length setting.
For example if the input is 1920x1080 and the length is 960 the height will be 540.
It takes
YES or NO as an argument and accepts the shortest unique argument.
The default is NO .
PRx
–
Reset the PiP values to default where x = 1 or 2
Notes:
1) The PiP setting is established based on the last use of either the PPx or PCx Command.
3) For the Commands to set the PiP Alpha level of the PiP window refer to Table 18 .