manualshive.com logo in svg

Microtest PentaScanner, Руководство пользователя

Поделиться
Скачать
Microtest PentaScanner Скачать руководство пользователя страница 16

After calculating the NVP, press 

Save (F1)

 from the 

EDIT CABLE

 screen to store the new

settings. Then, press 

Default (F1)

 from the 

CABLE SETUP

 screen to select the cable as the

default cable type.

Customizing Autotest

To display the 

AUTOTEST SETUP

 screen, press the 

Extended Functions

 key, then 

select

Setup Autotest

. This screen lets you set the default Autotest, edit Autotest settings and delete

user-defined Autotests.
Press the

 Ñ 

or

 Ò

 

arrow key to scroll through the list. Or, press the

 Ï 

or

 Ð 

arrow

key to scroll up or down one screen at a time. When the Autotest you want to use is highlighted,
press 

Default (F1)

 to select it as the Autotest to run.

If your Scanner has an alphanumeric overlay on the keypad, use the keypad to change the Autotest
name. If your Scanner does not have an alphanumeric overlay, press 

Edit (F2)

 to edit the name. See

Chapter 4: Editing, Printing & Updating

 for more information on editing. Press 

Change (F2)

to set the Margin Display.

Press 

Delete (F3)

 to delete user-defined Autotests.

Press the 

ESCAPE

 key to exit.

Editing Autotest Information

To display the 

EDIT AUTOTEST 

screen, press the 

Extended Functions

 key, then 

select Setup

Autotest

, then highlight the Autotest to edit, then press 

Edit (F2).

 This screen lets you customize

Autotest settings.

Press the 

Ñ

 or 

Ò

 arrow key to scroll through the available options and press 

Select (F1)

 to choose

the highlighted option. Or, press the number on the keypad that corresponds to the option you
want.

Select 

Name/Options

 to edit the Autotest name and to change the 

MARGIN OPTION

. Select

Pairs

 to choose the pairs to be used in the Autotest, and to indicate which pairs have PASS/FAIL

criteria applied to them during Autotest. Select 

Tests to Run

 to choose which tests to run during

Autotest. Select 

Limits

 to edit test limits.

Press the 

ESCAPE

 key to exit.

Editing the Autotest Name

To display the 

EDIT AUTOTEST NAME 

screen, press the 

Extended Functions

 key, then select

Setup Autotests

, then highlight the Autotest to edit, then press 

Edit (F2),

 then select

Name/Options

. This screen lets you edit the Autotest name and change the 

MARGIN OPTION

.

If your Scanner has an alphanumeric overlay on the keypad, use the keypad to enter up to 14
characters for the Autotest name. If your Scanner does not have an alphanumeric overlay, press

Edit (F2)

 to display the edit screen. See Chapter 4: Editing, Printing & Updating for more

information on editing.

Содержание PentaScanner






























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды