Microtest 6630E, Руководство пользователя

Страница: 54 / 56

- 47 -
Appendix
Commands opened with “:LIST” are commands under Multi-Step List Mode.
Command Function Description
:LIST:STEP <step
number>
Set the step intended for the
current schedule
:LSIT:STEP? Read the scheduling step for
the current schedule
:LSIT:PARA
{OFF|RDC|LS|LP|CS|CP
|Q|D|RS|RP|Z|DEG|R
AD|R|X|Y|G|B|POL}
Set the measuring parameter
:LIST:PARA? Read the measuring parameter
:LSIT:FREQ <frequency> Set the measuring frequency
:LIST:FREQ? Read the measuring frequency
:LIST:VOLT <voltage> Set the measuring source as
voltage mode and then set the
voltage value.
Voltage range: 0.01-2.0
:LIST:VOLT? Read the set voltage value If the current measuring source is
constant current mode, then “0” will be
transmitted.
:LIST:CURR <current> Set the measuring source as
constant current mode and
then set the Fixed Current
Current range: If the output impedance
is 100 Ohm, then set at 0.0001-0.02.
Current range: If the output impedance
is 25 Ohm, then set at 0.0002-0.04.
:LIST:CURR? Read the set current value If the current measuring source is
constant current mode, then “0” will be
transmitted.
:LIST:SPEED
{MAX|FAST|MEDI |SLO
W|LONG|0|1|2|3|4}
Set the measuring speed MAX Maximum
FAST Fast
MEDI Medium
SLOW Slow
LONG Slowest
:LIST:DELAY <delay
time>
:LIST:DEALAY?
Set the time for delayed
measuring
Read the time for delayed
measuring
:LIST:COMP:MODE
<ABS|DEV|PERC|0|1|2
>
Set the upper/lower limit value
mode in the comparison
function
ABS Measuring value
DEV Deviation value
PERC Percentage of deviation value
:LIST:COMP:MODE? Read the value set for
upper/lower limit value mode
in the comparison
:LIST:COMP:NOMINAL
<nominal value>
Set the nominal value in the
comparison
:LIST:COMP:NOMINAL? Read the nominal value in the
comparison
:LIST:COMP:UPPER
<upper limit>
Set the upper limit value in the
comparison
:LIST:COMP:UPPER? Read the upper limit value in