3
3. Install software
1. Turn on your computer. If you are using
Windows NT 4.0, log in as "Administrator" in
order to install the software.
Take note that when Windows starts up, it will
go through the process of detecting new
hardware added to the system (in this case, your
scanner) and prompt you to update the system
with the necessary drivers. When a dialog box
comes up for this purpose, simply click
"Cancel" to proceed to the next step.
2. Insert the Microtek CD-ROM into your CD-
ROM drive. The Microtek Software Installer
screen should automatically come up.
Note: If the Microtek Software Installer screen does
not come up automatically, double-click "My
Computer" on your Windows desktop, then double-
click the CD-ROM icon to start the installer
program.
3. When the Microtek Software Installer screen
appears, click the
Install
button for each item
on the screen in the order of the programs
listed. (Note: For SCSI users, do not install the
second item on the screen, which is the USB
version of your scanner controller program.)
.
Click the "Install" button for each
software on the list.
SCSI Installation on the PC
For each software, follow the on-screen
instructions during installation. Default values
are specified at every point during installation;
simply accept these values to continue
installation until you finish.
In some applications, auxiliary information
(such as the Readme file) may be displayed
after that particular program finishes installing.
Simply click the "X" close box at the upper
right corner of the displayed window to return
to the Microtek Software Installer. Do not
restart your computer until all the software has
been installed. See additional notes below
where applicable pertaining to each software
application.
a)
Microtek ScanWizard SCSI version
. This is
your scanner controller program for capturing
images from your scanner and delivering it to
your image-editing application (in this case,
Adobe Photoshop LE). Follow the on-screen
instructions during installation. When you get
to the Select Components dialog box, choose
Adaptec SCSI Interface Card
as your interface.
After ScanWizard finishes installing, you will be
prompted to restart your computer. Select
No
to
continue installing the rest of the software.
b)
Microtek ScanSuite
. This is your scanner
utility program for scanning, copying, faxing,
OCR, and email from within the same program.
c)
Caere PageKeeper Standard
. This is your
document management program.
