XT5750 HS Scanner User's Manual 13
Step 2: Installing the Software
Important:
Do not remove the yellow sticker from your scanner until you are told
to do so. You must install all software before connecting your scanner.
Always close any open programs and turn off Anti-virus utilities before installing
software.
1. Turn on your computer.
2. Place the Microtek Software CD/DVD
into a drive.
3. Follow the on-screen instructions to
install the driver and software.
NOTE
:
If the Microtek Software Installer
screen does not come up automatically,
double-click the following in succession:
“My Computer”; the CD/DVD-ROM icon;
then
cdsetup.exe
to start the installer
program.
4. Click EXIT on the Microtek Software Installer screen when all the software
has been installed.
5. Restart your computer.
Drivers & Software Upgrades
After you finish the installation of software, if you found that the installed drivers and software
cannot run your product or your computer system properly later, please go to the Microtek
Download Service site at microtek.com/en/download to download and install any updates you may
require.
For additional information about Microtek products, please visit our website at www.microtek.com.
