Microtek MIL-800XL Plus, Руководство пользователя, Страница: 13 / 36

MII-800XL Plus User's Manual 13
Initial Setup
In order to ensure that the digitizer works properly, follow the five steps below to
set up your digitizer.
1. Unpacking the Package Contents
2. Installing the Software
3. Unlocking the Digitizer
4. Installing the TMA
5. Connecting the Digitizer
Step 1: Unpacking Package Contents
A. Opening the Shipping Carton
NOTE: Before unpacking, inspect the shipping carton for any signs of
mishandling or damage first. The digitizer’s packing carton and padding
material have been carefully chosen to prevent damage to the unit in shipping
and can withstand a reasonable amount of pressure.
After unpacking your digitizer package, refer to the later section to ensure that
you received all of the parts necessary for digitizer setup. If there are any
damaged or missing parts, notify the shipper immediately or contact customer
service.
Save the carton and all packing materials. If you need to ship the digitizer later,
it is recommended that you should repack it using the original wire ties, plastic
bags, foam supports and cartons, which protects your digitizer from
unnecessary damage.
After unpacking the shipping carton, follow
the steps shown below to take out your
digitizer and other accessory components.
1. Ensure that you put your shipping carton
toward the right direction. Then, open
the top cover.
2. Remove two cardboards from the top of
the shipping carton.