24 ArtixScan DI 5230/5240/5250/5260 & ArtixScan TS 540T User's Manual
On the Flatbed
This section shows you how to position a single-sheet document, such as a single
photograph or a page from a book, on the flatbed.
1. Fold down the Document Feed
Tray to close it.
Please refer to the previous section
“Closing the Document Feed Tray”
in this manual to close it.
2. Raise the scanner lid (ADF).
Locate the notch at the left-front lower side of the scanner. Then, grab on the
edge and corner of the scanner lid (ADF) to lift it up with your two hands.
3. Place the document to be scanned
face down on the scanner glass
surface. Position the top end of the
paper towards the
right
of the
scanner; then, lower the scanner lid
on the scanner glass surface.
WARNING
: Due to the weight of the
scanner lid (ADF) at the top of the
scanner, every time when you raise or
lower the scanner lid, please hold it with
your hands tightly; otherwise, the scanner
lid may fall down forcingly and then result
in personal injury and product malfunction.
