6
21
Connect the serial (DB9M to DB9F) cable (with serial-
to-USB adapter) to the port labeled ‘Host Communication’
on the back of the drive enclosure.
NOTE:
For XE systems the Host Communication is
internal, so you may skip this step.
22
Connect the serial-to-USB adapter end of the host
communication cable to the USB port on the base unit
labeled ‘Host Communication’.
NOTE:
The USB ports and positions on your system may
differ from those in the photo. Please follow the port
labeling on your particular system.
For XE systems the Host Communication is internal, so you
may sk ip this step.
23
Remove the USB software key from the instruction
manual package (carton containing folder and software
envelopes). Insert this key into the designated USB slot.
20
( XPRESSJET II and TEAC K2 PRINTER ONLY )
Connect the other end of the serial cable to the Printer
Control port on the back of the drive enclosure. For XL
systems, the cables should be labeled.
