Large Format Auto Open Heat Press with Slide-out Press Bed Manual
- 5-
Set temperature: 180
℃
.
Set time: (chemical fiber use for sublimation transfer paper: 30-50 seconds; pure cotton use for T-shirt
transfer paper: 10-20 seconds)
3). Aluminum sheet transfer:
Set temperature: 180
℃
Set Time: 45 seconds
NOTE:
1) Please switch off the machine and unplug the power cord when the machine is not in use
2) The heat platen will cool down to the room temperature, if heat press stays un-use for more than 30 minutes.
3) For better maintenance of heat press, the maximum setting temperature is 210 degrees C (410 degrees F).
4) To avoid re-heating the first transfer when printing double sided T-Shirts, insert a sheet of cardboard in between
the shirt, adjust the height to less pressure, then press.
5) Heat platen may pivot slightly back and forth rotationally. This is due to movement allowance within the clamp
assembly, and is normal.
MICROTEC
