Microtec CUT4060E, Руководство по эксплуатации

Страница: 25 / 36

micro
Tec
   
25
7. Setting Up and Changing the Setup
7.1 Specimen Fixture
To hold the specimens during cutting, various adapters and clamping fixture systems are
available, based on the micro
Tec
principle of modular construction. In conjunction with
the specimen orientation device, it is possible to orientate and align the specimen to the
plane of cut is simple manner. An adapter piece is inserted at the orientation point where
operations do not require such orientation.
7.2 Standard Specimen Clamping Fixtures
The standard specimen clamping fixture is used for paraffin wax or plastic molded blocks
of square or rectangular form. When using, the specimen is placed against the top fixed
jaw and clamped by the clamping screw.
Important!
On the grounds of stability, the specimen should not be allowed
to protrude too far beyond the clamping jaws.